Tag: dishtv

How-To: Reset Your Dish TV HD Set Top Box for Better Performance [With Pictures]

How-To: Reset Your Dish TV HD Set Top Box for Better Performance [With Pictures]

Do you use a Dish TV connection? If yes, chances are that over time your Dish TV set-top box has slowed down so much that it takes multiple seconds for it to respond to even the simplest of remote commands like Vol+/-.
Changing a channel takes minutes, and loading the program guide takes forever. It becomes very frustrating when you are browsing channels as you can never be sure if your remote input was missed by the box or it is just happily sitting there processing an old command.

If you have faced this situation and wondered if there’s way to fix this, let me tell you that, yes there is a way to fix this. All it requires is to clear up the box’s cache and do a reboot to freshen it up. After you have followed these steps, your box should become significantly fast.
I have only tested this process on my “Dish HD+ Recorder” box, but it should work on any other dish box as well.

Disclaimer: I have only provided this information with the intention of helping fellow users. I am not responsible for any damage or information loss to your box or TV that may arise as a result of you following these steps.

Reset Dish TV Set-Top Box
This is my set-top box on which I successfully completed this process.

Prerequisite: Make sure that you have turned on your TV and set-top box both and your set-top box has completed the boot process. You can leave your set-top box on for 10-15 minutes before starting the process.

Step 1: On your set-top box remote, press and hold the “Menu” button. Keep it held until you see a menu on your TV screen that is titled “Installation Main Menu” or something similar.

Reset Dish TV Set-Top Box
Select the “System Setup” menu item.

 

Step 2: In this menu, select the “System Setup” menu item and press “OK”. This will bring you to “System Setup” menu screen.

 

Reset Dish TV Set-top Box
Select the “Erase EPG” menu item.

Step 3: In the “System Setup” menu screen, select the “Erase EPG” menu item and press “OK”. The system will display a warning message on the screen like below.

Reset Dish-TV Set-Top Box
Press “OK” on this warning screen.

Step 4: Click “OK” or one of the Color buttons on the remote as the message instructs. Once you press “OK”, the system will display a message informing that the erasing is in progress like below.

Reset Dish TV Set-Top Box
Erasing…
Reset Dish TV Set Top Box
Success message

Step 5: Once complete, the system will go back to the “System Setup” menu screen automatically. Here, you should select the menu item “Erase flash FS”.

Reset Dish TV Set Top Box
Select the “Erase flash FS” menu item.

Step 6: Once again, the system will ask you for confirmation like below. Confirm on this screen to proceed.

Reset Dish TV Set Top Box
Press “OK” on this warning screen.

Step 7: When Step 6 completes, the box will automatically reboot. This reboot may take several minutes to complete as the system will download the program guide and other data from the network. You will see a progress screen like this:

Step 8: Once the update completes, your set top box is ready to operate and is faster than ever.

If this post helped you, don’t forget to share it with your friends on your favorite social media platform. Have a good day. 🙂